FNL-220LSY FNL-220LSY-250Y-SY-320Y-SY

This series of lathes have a live tooling function that provides multi-axis milling and turning and off-center line Y-axis milling capability
The ± 2.17” Y-axis off centerline milling provides larger work range than other competitors in its class.
Single piece of Meehanite® casting with torque tube design provides best damping characteristic and reduces deformation during cutting.
Spindle is supported by 3 sets of high-speed ball trust bearings and 1 set of cylindrical roller bearing.
The hydraulic clamping cylinder with a disk break ensures the rigidity for heavy-duty milling and full C-Axis in both spindles with a minimum interpolation of 0.001 degree. (SY Models)

ITEM	Description	S.A.E.	Metric
Control	Fanuc 0i-T	–	–
Capacity	Swing over bed	24.4"	Ø620 mm
	Swing over saddle	24.4"	Ø620 mm
	Max. cutting diameter	10.6"	Ø270 mm
	Max. cutting length	20.1"	510 mm
	Chuck size	6" / 8"	–
	Max. bar capacity	2" (opt. 2.5")	52 mm (opt. 65 mm)
Main spindle	Max. spindle speed	4,500 rpm	–
	Spindle nose	A2-6 ASA	–
	Spindle bore	2.4" (opt. 3.0")	62 mm (opt. 77 mm)
Travel	X / Y / Z axis	7.9" / 22.0" / ±2.2"	200 / 560 / ±55 mm
	B-axis	22.0"	560 mm
	C1, C2-axis	360°	–
Feed rates	X / Y / Z axis	1,181 / 1,181 / 393 ipm	30 / 30 / 10 m/min
	B-axis	787 ipm	20 m/min
	C1, C2-axis	200 rpm	–
Trurret	Number of tools	16	–
	Turret type	Power BMT45	–
	OD tool size	3/4" x 3/4"	20 x 20 mm
	Boring bar size	1 1/4"	32 mm
	Tool change time	0.16 sec (T-T)	–
Sub-spindle	Max. spindle speed	6,000 rpm	–
	Spindle nose	A2-5 ASA
	Chuck size	6"
	Spindle bore	2.2"	56 mm
	Bar capacity	1.8"	Ø45 mm
Machine dimensions	Floor space (W x D x H)	161.8" x 76.9" x 83.5"	4,109 x 1,954 x 2,122 mm
Machine dimensions	Net weight	13,000 lbs.	5,900 kg

TURNING